Micro T-1 and H-1 sights now available with
Micro T-1 and H-1 sights now available with 2 MOA dot! Chinese receiver and several Springfield Armory, Inc. receivers. Chinese receiver and several Springfield Armory, Inc. receivers. Chinese receiver and several Springfield Armory, Inc. receivers. It would not insert into the operating rod channel. The operating rod looks very good but I recommend having a M14 Scope Mounts gunsmith … Continue reading → Grip Pod 8/4/2011 1:58:58 PM Originally Posted By sinlessorrow: i like mine, its not a great bipod but it does what it was intended to ent to their site and there appears to be no mention of it whatsoever. tominjax

AR-15 Accessories
4/4/2012 10:26:59 AM I ordered my rifle AR-15 Accessories from M&A and had it 3 days later. From my bit of research, I was satisfied w/ all of their AR-15 Accessories materials, especially for the price. Wilson or Rock barrels. LMT manufactures their uppers. This will be my first AR build and while price will [...]

Defense Review – BAE Systems ADAPTIV Hexagonal Pixelated Thermal …
Defense Review – BAE Systems ADAPTIV Hexagonal Pixelated Thermal … Defense Review – BAE Systems ADAPTIV Hexagonal Pixelated Thermal …BAE Systems ADAPTIV Hexagonal Pixelated Thermal/IR (Infared)/Multispectral Adaptive Camouflage/Invisibility Cloaking System/Vehicle Armor System for Infantry Ground … So will the Mesa Tactical be too large So will the Mesa Tactical be too large So will the [...]

Eotech
4/22/2012 11:22:11 AM aimpoint Our opinions won’t help you decide what you like best. They only convey what we like best. You have to do what we all did and buy both and choose for yourself. [...]

M14 Scope Mounts
M14 Scope Mounts

M14 Scope Mounts
It’s easiest for me to lock the bolt open, insert the mag and rock it back to lock it in place. Then I release the bolt and let the first round strip out of the mag into the chamber. Be sure to check the safety – I let a friend shoot my rifle(newbie to M14 Scope Mounts rifles) and he darn near tried to break the trigger off pulling on the thing trying to make the rifle go bang – he had the safety on. Remember a good crisp trigger pull – no “milking” like you would with a bench rifle. Speaking of benches – I bought a shooting mat so I can shoot prone (with and without a bi-pod). I also shoot sitting, and off-hand. Don’t use the bench all the time – these are battle rifles – it’s more satisfying and fun to shoot them the way they were intended to be used. Unless you’re saving them for some reason, try out all of your mags for functioning before you lock them up in the safe. If you do use the bench for sighting, groups, etc. I recommend using your range bag rather than a bipod or BR [...]

Mesa Tactica
Mesa Tactica Mesa Tactical – Weaver .22 & Ruger 77 Scope Rings – MSP AR-15 Accessories, Scope … Weaver .22 & Ruger 77 Scope Rings – MSP AR-15 Accessories, Scope …Precision and Tactical Weaver .22 & Ruger 77 Scope Rings: … Continue reading →

[...]

[...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about [...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
M14 Scope Mounts

Gun Accessories
1/19/2010 7:00:27 PM 44mag Top Gun Supply Whamo [Member] 1/19/2010 10:16:08 PM Natchez Shooters Supplies Midway edit – Great service from both. They both have printed catalogs – Midway’s catalog is just plain awesome, Natchez’ is small but nice. Kodiak-AK

1/19/2010 7:00:27 PM 44mag Top Gun Supply Whamo [Member] 1/19/2010 10:16:08 PM Natchez Shooters Supplies Midway edit – Great service from both. They both have printed catalogs – Midway’s catalog is just plain awesome, Natchez’ is small but nice. Kodiak-AK

Mesa Tactical
Mesa Tactical –

Mesa Tactical –

- Patches – MIL-SPEC MONKEY STORE
- Patches – MIL-SPEC MONKEY STOREMonkey Made Morale Patches … For those who always seem to find a way to suck the fun out of everything. – Patches – MIL-SPEC MONKEY STOREMonkey Made Morale Patches … If you are going … Continue reading →

Witness:
Witness: SANTA ANA, Calif. (AP) — A forensic specialist testified Monday that two

“This is not a done deal today,” said
“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.” Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly. Rawles said he was concerned with an [...]

“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.”

Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly.

Rawles said he was concerned with an item on the incentive list. Mayor Keno Hawker abstained because his back yard abuts the mall site.

A pedestrian-oriented theater district on 30 acres would be the first phase of construction, which could begin in about 18 months.

That includes a 57,000 square-foot Cinemark theater, the second the national chain would locate in Arizona, and 103,000 square feet of retail space.

“This is going to be a place where you want to be,” said head architect Robert Saemisch of Saemisch DiBella Architects Inc., which will design the theater.

Future phases include the Bass Pro store on 25 acres, a 110-acre retail district where the Super Wal-Mart would locate, a 30-acre auto mall and a 45-acrecommerce park.

Bass Pro Shops, an outdoor sporting-goods giant that sells everything from rods and rifles to hunters’ underarm deodorant and camouflage infant booties, attracts millions of tourists annually.

The Missouri-based chain is opening its first Western store in Las Vegas on Nov. 11. Saemisch estimated that the 180,000- to 200,000-square-foot store in Mesa Tactical could attract 2 million tourists a year.

The developers’ proposal will be considered at several City Council sessions and planning and zoning meetings.

The city also plans to hold several public meetings on the development.

markm
8/20/2004 12:19:37 PM

But Tempe Mayor Hugh Hallman didn’t see it as a battle, instead hoping both developments could “complement each other” and become a regional retail force.

Who is Hugh Hallman? I though Tempe’s mayor was that Peter Puffing Homo, Neil Guliano!

(Hugh must be his Homeland Security Advisor.)
mylhouse
8/20/2004 12:42:25 PM
I think Guiliano finally retired to go chug cock elsewhere than the upsidedown pyramid…
TimW
8/20/2004 6:22:17 PM
Guilani retired
Hallman got elected.

The use of taxpayer money to “lure” businesses is repugnant, no matter what business it is.

Will Glendale give a Blimpie’s owner a multi-million (hell—multithousand) dollar tax break like that? I mean…sales taxes in Glendale and jobs, too…?

Answer is no. No city will.

It’s bullshit and taxpayers should be outraged.

TimW
Phoenix
innocent_bystander
8/20/2004 6:38:05 PM
Tim,

I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.
TimW
8/20/2004 7:14:59 PM
Originally Posted By innocent_bystander:
Tim,

I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.

Why don’t they try creating a business environment where they don’t have to give taxpayer-funded bribes/kickbakcs/payoffs (which is all this is) in order to attract businesses.

I can’t imagine that residents wouldn’t like their portion of the $40 million instead of it going to a government-funded giveaway.

Tim
tfod
8/20/2004 8:42:42 PM
Better than spending money on a stadium.
TimW
8/21/2004 12:10:42 AM
Originally Posted By tfod:
Better than spending money on a stadium.

Tell me about it. I spent enough of my own money trying to get it stopped.

TimW
(Glendale) AZ
The_Macallan
8/21/2004 12:50:50 AM

I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.

SPECTRE
8/21/2004 11:36:46 PM
Originally Posted By The_Macallan:
I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.

AMEN !!

–
Mesa Tactical

Ak-47 Stocks – Ruger 10/22 Accessories
aimpoint compm4; aimpoint micro; aimpoint scopes; aimpoint t1; AK 47 Stocks; AK 47 Tools; AK-47 Accessories; AK-47 Folding Stock; AK-47 Furniture; AK-47 Handguards

Man accused in Deerfield Beach double
A suspect was being held without bond Wednesday and accused of

George Zimmerman’s head wounds after Trayvon Martin
(CBS News) Medical records showing that George Zimmerman was treated for a fractured nose and cuts to the back of his head after fatally

AR-15 Accessories
11/17/2011 10:07:46 PM I just built one of those AR-15 Accessories last year. I have a couple thousand rounds through it with no problems at all. I am extremely happy with it for the money and application. It seems like most other people have good experience with Del-Ton as well. Be prepared for a wait [...]

11/17/2011 10:07:46 PM I just built one of those AR-15 Accessories last year. I have a couple thousand rounds through it with no problems at all. I am extremely happy with it for the money and application. It seems like most other people have good experience with Del-Ton as well. Be prepared for a wait as they are often backed up on orders. McGruff1533

Glock Accessories
4/26/2012 12:17:28 AM just a comment…if you are stocking up on promo 115 grain ammo, do an accuracy test, but move the target out to 35yards…use a rest… compare it to the cheaper end 147 grain stuff like Federal American Eagle This.But Monday I pick up my first Glock Accessories. A Gen 4 g26 for [...]

4/26/2012 12:17:28 AM just a comment…if you are stocking up on promo 115 grain ammo, do an accuracy test, but move the target out to 35yards…use a rest… compare it to the cheaper end 147 grain stuff like Federal American Eagle This.But Monday I pick up my first Glock Accessories. A Gen 4 g26 for ccw. Since wi finally got ccw I have went through a number of different guns trying to find the right carry gun. I was always a 1911 guy but found myself not wanting to bang up my kimbers. Have an xd but don’t trust the safety as much as the Glock Accessories safety after researching them. Even tried carrying my model 60 pro series but wanted more rounds. Almost bought a kahr, but ended up buying the g26. I’ll let u know how she shoots after monday TuskenRaider

Florida
PORT ST. JOHN, Fla. — The unmistakable sound of gunfire stirred the neighbors early Tuesday. Moments later, there was a knock at the front door. They opened it to find three children from next door — at least one of them shot and wounded …

Girl caught in Ohio
CLEVELAND, May 16 (UPI) — Kayla Allen, a 10-year-old who survived an April

Scope Mounts
1/5/2010 1:44:16 AM Originally Posted By nictra: I’m probably wrong about this, not a structural engineer, but couldn’t you bevel out part of the folder so that it will go past the mount? The issue of not being able to fold it with optics on isn’t a big one in my book, because you can’t [...]

1/5/2010 1:44:16 AM Originally Posted By nictra: I’m probably wrong about this, not a structural engineer, but couldn’t you bevel out part of the folder so that it will go past the mount? The issue of not being able to fold it with optics on isn’t a big one in my book, because you can’t do it with the left side folders either. I was toying with this idea myself just the other day……. I finally got around to checking this out, and no, it won’t work. the scope scope mounts interferes with where the holes for the folder are, plus the last rivet does not align, my bad. uscombatdiver

Scope Rings
4/29/2012 10:13:02 AM My descending order of preference: Wilson Combat Ghost Scope Ring with front tritium Rifle sights bead CS leadfoot

4/29/2012 10:13:02 AM My descending order of preference: Wilson Combat Ghost Scope Ring with front tritium Rifle sights bead CS leadfoot

Larue Tactical
Larue Tactical Larue Tactical 1 – Larue Tactical LT751 Micro mount 2 – Larue Tactical LT104 Scope mount 1 – Larue Tactical ACOG mount 2 – Larue Tactical flashlight mounts 1 – Larue Tactical lo-pro gas block…………. flpickupman 3/8/2011 6:38:32 PM EDT LT RCO mount along with an LT707 flashlight mount. I’m hoping that the [...]

Larue Tactical
Larue Tactical 1 – Larue Tactical LT751 Micro mount 2 – Larue Tactical LT104 Scope mount 1 – Larue Tactical ACOG mount 2 – Larue Tactical flashlight mounts 1 – Larue Tactical lo-pro gas block…………. flpickupman 3/8/2011 6:38:32 PM EDT LT RCO mount along with an LT707 flashlight mount. I’m hoping that the offset version [...]

Larue Tactical
1 – Larue Tactical LT751 Micro mount 2 – Larue Tactical LT104 Scope mount 1 – Larue Tactical ACOG mount 2 – Larue Tactical flashlight mounts 1 – Larue Tactical lo-pro gas block…………. flpickupman 3/8/2011 6:38:32 PM EDT LT RCO mount along with an LT707 flashlight mount. I’m hoping that the offset version (similar to [...]

1 – Larue Tactical LT751 Micro mount
2 – Larue Tactical LT104 Scope mount
1 – Larue Tactical ACOG mount
2 – Larue Tactical flashlight mounts
1 – Larue Tactical lo-pro gas block………….

flpickupman
3/8/2011 6:38:32 PM EDT

LT RCO mount along with an LT707 flashlight mount. I’m hoping that the offset version (similar to the Scoutlight offset mount) Mfingar alluded to will be arriving sooner rather than later.

ML3 w/LT150
Larue Tactical _Tactical [Industry Partner]
3/8/2011 6:58:53 PM EDT
Originally Posted By flpickupman:

It’s okay, you can whisper it to me.

TREETOP
3/8/2011 7:18:42 PM EDT
Scope mount:I don’t like the Larue Tactical 11″ quad-rail that came with the 16″ Stealth upper. While a most excellently made device, I just don’t use most of the rail. It seems too heavy and with the plastic protectors, too large in diameter.

I really like something like Daniel Defense MFR 12.0 concept, except I want to keep it at 11″ in length.

–

Someone else is saying what I’ve been saying all along. The Mesa Tactical for the 930spx that I was sold makes my shotgun a one shot club. I have spend a lot of time on the phone with both Mesa and Mossberg 500 Accessories ,hours actually. I’ve spoken to engineers, sales reps, and customer service [...]

3/30/2012 11:23:52 AM ok, I am a newbie here and I bought a colt 6920 a few months ago. I am looking at getting a 22 dedicated upper but the one I am looking at doesnt have any sights on it. So I would need to buy some iron sights or an optic. I am looking at the MAGPUL MBUS Gen 2 Flip Up Sights which are around $90, should I just upgrade to the Aimpoint Scope or something like that. Thoughts? CIE

1/26/2012 9:50:01 PM M4 double heat shield, and single heat shield CAR handguards. No rails on them as of yet. SYSTEM 1/26/2012 10:18:52 PM Topic Moved countryboy52590

? Mesa_Tactical 6/26/2005 9:33:46 AM Originally Posted By Dawg180: Mesa Tactical posts here fairly often, hopefully they will see this thread and respond! Well, we aren’t sure what to say. Naturally we think it’s a great product, but when someone asks for reviews or opinions we try to let other more objective folks offer their comments. We are happy to
Read more…

Trades: Well, I have a “sort of” update
Trades: Well, I have a “sort of” update on the issues that many people have been geting with the Mesa Tactical side saddle carrier. Here is the original thread: www.ar15.com/forums/topic.html?b=6&f=1&t=243361 After reading the origininal thread, i found that the screws on my Mesa Tactical shell carrier too had become quite loose, so after getting some good time to look at
Read more…

Trijicon Night Sights – MSP AR-15 Accessories, Scope Mounts & Rings
Trijicon Night Sights – MSP AR-15 Accessories, Scope Mounts & RingsPrecision and Tactical Trijicon Night Sights: from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters designed and … PM As a Mesa Tactical dealer I bragg PM As a Mesa Tactical dealer I bragg on them a lot. [...]

Trijicon Night Sights – MSP AR-15 Accessories, Scope Mounts & Rings
Precision and Tactical Trijicon Night Sights: from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters designed and …

PM As a Mesa Tactical dealer I bragg
PM As a Mesa Tactical dealer I bragg on them a lot. I feature their stuff on my custom builds and on occassion a cleint will contact me with an issue. Always little stuff. I have simply have them call Dan at Mesa Tactical and he resloves the issue right then with no BS [...]

M14 Scope Mounts
M14 Scope Mounts – Welcome to Joe’s Outdoor Office: New video series on all things outdoorsBass build a nest , lay their eggs and guard them from attack for about two weeks. it is fascinating to watch. The

MSP: AR-15 Accessories, Scope Mounts & Rings, Rifle Scopes …
AR-15 Accessories, Scope Rings & Scope Mount from Mounting Solutions Plus a manufacturer of high quality tactical firearm accessories and a distributor of respected …

Q: Which bayonet is supposed to go with
Q: Which bayonet is supposed to go with the M14 Scope Mounts? A: The US M6 bayonet. It fits the US M8A1 sheath, like the M4, M5, and M7 bayonets. Websites: www.imageseek.com/M1A Scope Mounts -Different’s M14 Scope Mounts Site www.fredsM14 Scope Mountsstocks.com -Fred’s M14 Scope Mounts Stocks [...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the
Read more…

Weaver 432M Top Mount Bases – 48456 for Browning Bar Only: MSP …
Weaver 432M Top Mount Bases – 48456 for Browning Bar Only: MSP … M14 Scope Mounts – Weaver 432M Top Mount Bases – 48456 for Browning Bar Only: MSP …Precision and Tactical Weaver Top Mount Aluminum Bases: Weaver 432M Top Mount Bases – 48456 for Browning Bar Only from MSP – Mounting Solutions Plus Firearm [...]

Weaver 432M Top Mount Bases – 48456 for Browning Bar Only: MSP …
M14 Scope Mounts – Weaver 432M Top Mount Bases – 48456 for Browning Bar Only: MSP …Precision and Tactical Weaver Top Mount Aluminum Bases: Weaver 432M Top Mount Bases – 48456 for Browning Bar Only from MSP – Mounting Solutions Plus Firearm … Weaver Picatinny Riser Set: MSP Scope MountsPrecision and Tactical Weaver Accessories: Weaver [...]

M14 Scope Mounts
M14 Scope Mounts

Levi Johnston to Name His Daughter After a
Levi Johnston to Name His Daughter After a Avid hunter Levi Johnston, 21, plans to name his daughter-to-be after his favorite Italian Levi Johnston to name newest baby girl “Beretta,” after Levi Johnston, the father of Sarah Palin’s granddaughter, is expecting a new child. And the name he and his girlfriend have picked out for [...]

Gun Accessories
6/20/2009 8:50:12 AM I would advise against it. On two occasions I know people who were either detained or denied flight based on them carrying either an optic or in one case a magazine for an airsoft pistol. Bottom line is if the TSA agent making $8 /hr is too stupid to know what it [...]

The

Police: Shooting Of Home Intruder Was Self-Defense
He told Albright to call police while he got an

M14 Scope Mounts
Some state level Army Guard programs also probably have some NM M14 Scope Mounts‘s too… See my post above. We are not the only USN armory to have M14 Scope Mounts‘s either. In fact the USN has a crap load of M14 Scope Mounts‘s in the inventory. Some used for nthing more than casting lines.. [...]

Mesa Tactica
Im really hoping Mesa Tactical will sort this issue out. As i said, i love their stuff (and have been looking at a couple of their other products), all the stuff that THEY make is top quality. It would be a shame if some outsourced cheapie screws lost them customers I’ll shoot them an email [...]

Journalists, State Police seek common ground
Members of the news media were then taken to the firing range for a demonstration of the .223-caliber

Gun used in murder-suicide was sold illegally, official says
Gun used in murder-suicide was sold illegally, official says Gun used in murder-suicide was sold illegally, official says Gun used in murder-suicide was sold illegally, official saysBuchanan County Attorney Shawn Harden said radiologist Timothy Roses bought the 9 mm Those would be the two I mentioned above. Those would be the two I mentioned above. There’s something odd about the
Read more…

AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …
AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine M14 Scope Mounts M14 Scope Mounts M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and [...]

AR-15 Rifles : AR-15 Rifle Sights, Grips, Scopes & AR-15 …
Find a wide variety of AR-15 rifles, rifle accessories and AR-15 parts at Cabela’s. … MWG 90 Rounder AR-15 Magazine

M14 Scope Mounts
M14 Scope Mounts M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying [...]

M14 Scope Mounts
M14 Scope Mounts – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from [...]

M14 Scope Mounts –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

M14 Scope Mounts
M14 Scope Mounts

M14 Scope Mounts

A1 style sights but know I need to
A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on [...]

A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on [...]

A1 style sights but know I need to use the “L” marked sight for 25M. Now my question with is should I use an “A1 zeroing target” or a “M4 zeroing target” or just make do with an A2 target, now I know these targets make the rifles accurate to 300M+ but I plan on shooting up to 25-75 yards at the most since I will be hunting with it this fall in the woods and don’t need a .308 with a scope that can see what color underwear a flea is wearing at 300 yards. So any help will be appreciated.

DVCER
Bronze Contributor
Team Member

Joined: Jan 2001
USA CO, USA
SHTF ammo dog
Offline
Posts: 1632
Link To This Post
Blog User Blog
Media Media Collections 100% (9): 10/5/2011 10:38:41
Irons or optics?

The problem with socialism is, sooner or later, you run out of other peoples money
zulthor
Member
Member

Joined: Jan 2011
USA PA, USA
Online
Posts: 757
Link To 100% (1): 10/6/2011 10:35:52 AM EDT
whether it’s iron sights or optics I bet you could do better if you had a more preciseshooting targetsto aim at.
pilckem
Member
Member

Joined: Jun 2007
USA AL, USA
Offline
Posts: 29
Link To

The new XPS is where its at and if you shop around theres a few companys that will price match Botach when they put the XPS3.0 on sale, which is 426 bucks. So for 26 bucks more than the Aimpoint Pro you can have the XPS with NV compatibility. User Info IM User Email User [...]

The new XPS is where its at and if you shop around theres a few companys that will price match Botach when they put the XPS3.0 on sale, which is 426 bucks. So for 26 bucks more than the Aimpoint Pro you can have the XPS with NV compatibility. User Info IM User Email User [...]

Sniper CountryThis web site and all related or referenced materials and links are solely and strictly for informational purposes.Moreover, this web site is intended solely for the … Remington Trigger Adjustments – Sniper CountryIn the U.S.A., we live in a litigious society, and for those of you who live in Rio Linda, that means fools [...]

bsa scopes – A prototype Urbino Tactical Stock for the Benelli AccessoriesM4 has been undergoing rigorous testing with a major west coast police department during the winter of 2009-2010, and has been receiving rave reviews from test participants. “Apparently,” says Barrie, “it’s just what the doctor ordered. We are very excited to be bringing this [...]

bsa scopes –

A prototype Urbino Tactical Stock for the Benelli AccessoriesM4 has been undergoing rigorous testing with a major west coast police department during the winter of 2009-2010, and has been receiving rave reviews from test participants. “Apparently,” says Barrie, “it’s just what the doctor ordered. We are very excited to be bringing this innovative design to market.”

(West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. [...]

Report A Non-Emergency Crime OnlineA new form allows Duke community members to report incidents to Duke Police online Police Host Meet And Greet Events“Tips ‘n Treats” sessions begin Oct. 17 (West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for [...]

Already recognized as the brightest sight in today’s military market, the EOTech Sights further eliminates any concern of reticle washout in desert or arctic conditions. ” Now thats good information! Thank you! I looked back at the one I ordered and it does not specify which revision it is. The company does have a great [...]

AK 47 Scope Mount – aimpoint 3x

AK 47 Scope Mount –
aimpoint 3x

Aimpoint M2 – I think it’s what I’m trying to find for my 522, but SIG customer service is clueless. Thanks! Sure can. Here you go. They have to mill out a slot in the lower for this one. Here is the one that that my 522 came with. it has a screw that goes [...]

Aimpoint M2 –

I think it’s what I’m trying to find for my 522, but SIG customer service is clueless. Thanks! Sure can. Here you go. They have to mill out a slot in the lower for this one. Here is the one that that my 522 came with. it has a screw that goes through from the other side and can be reversed for left handed. heavyduty 2/12/2011 5:51:04 PM Thanks, Chris – from the first small pic I thought it had the same arrangement as a 522. Bummer. I’m considering having a shop turn up a new loop end that would accommodate a HK hook. I figure that I could sell a few of them to make it economically feasible.Slings dont’ seem to get much attention. What’s a comfortable and balanced rifle sling for a 20″ varmint rig with high power scope

T Originally By Chrome308: Except for the turrets, it looks like a toss-up on paper. Hence my nod to the .mil issue piece. wildearp Get off my lawn! Platinum Contributor Team Jun 2003 USA AZ, USA Military 22303 : 0-0-0 : 6/16/2011 12:31:08 T I have three LRT M3s. Simple Solutions to Complex problems. SEMPER FI, DO OR DIE! NRA Life SASS Life chewbacca What is tinfoil today, is NEWS tomorrow. Bronze Contributor Team May 2004 USA AZ, USA 8808 : 0-0-0 : 6/16/2011 12:53:35 T I researched and looked at both for quite a while before I chose the SS. The HD series IS NOT the same as the old school SS scopes. I have top quality optics of all types, and the 10x42HD is a top quality scope, with excellent glass. “Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety.” -Ben Franklin KILLERB6 “The men with green eyes” Bronze Contributor Team Jan 2002 AFG AFG Military 7741 : 0-0-0 : 6/16/2011 1:02:37 T Originally By wildearp: I have three LRT M3s. Show off! I’m happy to have UNO. Scooter1942 Bronze Contributor Team Sep 2002 USA TX, USA 2150 : 0-0-0 : 6/20/2011 3:36:35 Well, I received the Leupold. Not in the best condition, a few scratches on the tube and the adjustment knobs are a little mushy. Called Leupold and they will replace the adjustments for free under warranty.

Eotech

Eotech

M14 Scope Mounts
Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool. wetidlerjr [Life Member] 8/10/2010 6:14:18 AM Originally Posted By GeorgeCostanza:… Also I want to remind everyone that it is ok to [...]

Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool.
wetidlerjr [Life Member]
8/10/2010 6:14:18 AM

Originally Posted By GeorgeCostanza:…

Also I want to remind everyone that it is ok to love the M14 Scope Mounts‘s, just like we should love our Bow and arrows and slingshots too. Even obsolete weapons are still cool.

Oh, gee, thanks !

–

How fat your wallet is and the quality
How fat your wallet is and the quality of accessories you are used to buying will be your guide. +1 Perfect answer Some personal observations 0.02 after having owned a Mesa Tactical setup on a 500… – Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He [...]

How fat your wallet is and the quality of accessories you are used to buying will be your guide.

+1 Perfect answer

Some personal observations

0.02 after having owned a Mesa Tactical setup on a 500…

–
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about [...]

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –

Defense Review – BAE Systems ADAPTIV Hexagonal Pixelated Thermal …
BAE Systems ADAPTIV Hexagonal Pixelated Thermal/IR (Infared)/Multispectral Adaptive Camouflage/Invisibility Cloaking System/Vehicle Armor System for Infantry Ground …

aimpoint ml2 –

aimpoint ml2 –

There will never, repeat never, be M14 Scope Mounts‘s availible from CMP for civilian consumption. Never. Ever. Interceptor_Knight [Team Member] 5/12/2006 12:18:56 AM What happened to all of the rifles that “went back”? Valkyrie [Member] 5/12/2006 12:40:08 AM The base armory( a USN base) has several semi auto conversion, real deal, match M14 Scope Mounts‘s [...]

There will never, repeat never, be M14 Scope Mounts‘s availible from CMP for civilian consumption. Never. Ever.

Interceptor_Knight [Team Member]
5/12/2006 12:18:56 AM
What happened to all of the rifles that “went back”?
Valkyrie [Member]
5/12/2006 12:40:08 AM
The base armory( a USN base) has several semi auto conversion, real deal, match M14 Scope Mounts‘s that shooters(USN Members) can check out for matches.. I was tempted just to get to shoot one..

–

The lack of a chrome lined barrel on the SA guns is an added bonus too. MackUSMC [Member] 2/4/2009 10:00:10 PM Do it absolutley! it is a very fair trade. The poly may not have the finnish of the springfields but the parts on the rifle, such as the reciever, and op-rod are forged, not investment cast. the poly barrels are chrome lined and are equal in quality to GI M-14 Scope Mounts barrels. Parts for the M-14 Scope Mounts will interchange with the poly M-14 Scope Mountss with the exception of the gas cylinder lock. the first batch of poly/norinco M-14 Scope Mountss bolts were hit and miss on the case hardening, but you can get replacements or swap the poly bot for a GI. the only caveat about that is have it done properly and make sure the head space is acceptable. The rear sight truss, base and knobs were sometimes soft, and not as durable as the GI or springfield inc. parts.

Mesa Tactical
Mesa Tactical – Mesa Tactical

Mesa Tactical –
Mesa Tactical

Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you [...]

Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:

Mike,

I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.

If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.

The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.

Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.

The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.

Thanks,

WarriorClass
III

My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.

The big thing with the VLTOR is a
The big thing with the VLTOR is a more conventional M14 Scope Mounts type stock mated to a collapsing buttstock with a seperate pistol grip. Kiznelly [Member] 9/9/2009 8:30:24 PM Originally Posted By Milo5: Troy, SAGE, And VLTOR, all offer a shortened length of pull through the use of collapsible stock assemblies. SAGE can also [...]

The big thing with the VLTOR is a more conventional M14 Scope Mounts type stock mated to a collapsing buttstock with a seperate pistol grip.
Kiznelly [Member]
9/9/2009 8:30:24 PM
Originally Posted By Milo5:
Troy, SAGE, And VLTOR, all offer a shortened length of pull through the use of collapsible stock assemblies.
SAGE can also offer side folding capability, the SAGE rear block can be replaced with a side folding block for even more compact storage.

–

Good luck with yours. acidman 9/29/2010 9:59:04 PM Originally Posted By rlmxracer: I just ran another 75 shells though it today with no problem. I even shot some Winchester xtra-lite 7.5 bird shot 1oz shot@ 1180fps. Good luck with yours. I sure hope the updated fasteners solve my issues. If so, then a big thumbs up to Mesa Tactical. We will see. It’s good to hear that your works as advertised. acidman 10/5/2010 9:08:44 AM Just a final update concerning my Mesa Tactical 930spx side saddle.

So will the Mesa Tactical be too large
So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175? So plate carriers cont work as well if plates are not in… Glad to know that now. Just out of curiosity; what is the price range for a good set of plates? ARCANGEL 5/29/2009 8:50:57 AM Check THIS [...]

So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175?

So plate carriers cont work as well if plates are not in… Glad to know that now. Just out of curiosity; what is the price range for a good set of plates?
ARCANGEL
5/29/2009 8:50:57 AM
Check THIS for an idea on plates pricing.

and HERE too.
TimW
5/29/2009 3:01:25 PM
Originally Posted By LRB_M1A:
So will the Mesa Tactical be too large for a person that is 6’3 and weighs 175?

Probably be too big…I have a friend who is roughly that size. Height-wise, it was fine. But it wouldn’t cinch down tight enough. Here’s what he wrote when I asked his size:

I am 6-3 and 180 lbs. As for chest size…..not sure but I’m pretty thin there too. My waist is 34 or 36 and my chest is close to that.

If I had soft armor on I could have fit the vest.

So there you have it.

LRB_M1A
5/30/2009 12:10:14 AM
Well thank you TimW for the honest reply.

I am playing around with the idea of buying a plate carrier now that I know plates are not toooo expensive. I was under the assumption that plates alone were in the $1000 range.

Currently for my gear set up I have x2 TT 5.56 Triple Mag Panel, x2 5.56/.223 Single Mag Pouch, HSGI Blowout Pouch, and a HSGI Mini Modular Radio pouch. Am I going to run into problems fitting all of that onto a plate carrier?

vedubin01
5/30/2009 12:46:54 AM
TimW
5/30/2009 2:04:16 AM
Originally Posted By LRB_M1A:
Currently for my gear set up I have x2 TT 5.56

–
Mesa Tactical

Men’s Lined Jeans, Men’s Jeans, Men’s Casual Clothing, Clothing …
Cabela’s E-Mail Sign-Up. Our e-mail is filled with deals, news, sneak previews, top-rated products, e-mail only specials and more.

eotech magnifier –

eotech magnifier –

Larue Tactical
[YOUTUBE] http://www.youtube.com/watch?v=uMine84RTEQ&feature=channel_video_title StrangerDanger [Member] 9/9/2011 5:24:07 PM EDT BAD ASS is an easy choice when selecting the best. Particularly in the 45 degree variant. StrangerDanger [Member] 9/9/2011 5:24:47 PM EDT Double Tap Duffy [Dealer] 9/9/2011 5:51:55 PM EDT Now if only we can convince Larue Tactical to make some 45/90 receivers…it’d be easy, two out [...]

[YOUTUBE] http://www.youtube.com/watch?v=uMine84RTEQ&feature=channel_video_title StrangerDanger [Member] 9/9/2011 5:24:07 PM EDT BAD ASS is an easy choice when selecting the best. Particularly in the 45 degree variant. StrangerDanger [Member] 9/9/2011 5:24:47 PM EDT Double Tap Duffy [Dealer] 9/9/2011 5:51:55 PM EDT Now if only we can convince Larue Tactical to make some 45/90 receivers…it’d be easy, two out of three requirements are already met: 1. Mill off the selector stops, LT receivers don’t have any 2. 68 degree Fire engraving, LT receivers have a radiused FIRE engraving that’s already usable 3.

Waukegan teen arrested in cellphone robbery with
Waukegan teen arrested in cellphone robbery with A 16-year-old Waukegan youth is being held on $500,000 bond this week, charged as an adult with armed robbery after he allegedly used a Quail Hollow Club / Getty ImagesIt’s tournament time! The PGA Tour moves to North Carolina for one of the top tournaments on the schedule — the Wells Fargo Championship.  Here’s
Read more…

Aimpoint Comp M4
Aimpoint Comp M4 I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 [...]

Aimpoint Comp M4
I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP [...]

I have a Aimpoint Comp M4 in a QRP mount that I bought a magnifier for and did not like the twist mount so I ended up buying a LaRue pivot mount LT755 to replace it. I didn’t realize it, but the LaRue pivot mount sits higher than the Aimpoint Comp M4 in the QRP mount. Any suggestions to get them to line up other than buying the LaRue LT659 mount for the M4? I’d have just left it alone and stuck with the twist mount rather than having to buy 2 mounts. opticsplanet [Industry Partner] 2/7/2012 4:35:56 PM Do you have this spacer installed on your CompM4? http://www.opticsplanet.net/aimpoint-standard-ar15-spacer-for-qrp2-qrw2.html Chase B. Freaky